Skip to content

Bong Joint Sizes: 14 mm vs. 18 mm and What Fits What

Bong Joint Sizes: 14 mm vs. 18 mm and What Fits What

Two pieces of glass only work together if their joints match. The size is printed on the product page, but it helps to know what it means. This guide covers the two sizes we use most.

Mini Apiary 11 inch beaker bong with an 18 mm joint

What do 14 mm and 18 mm mean?

The number is the width of a joint in millimeters. A joint is the ground-glass opening where one piece slides into another. A 14 mm joint is a little over half an inch. An 18 mm joint is a little under three quarters of an inch.

Male and female joints

A male joint slides inside a female joint. Bowls and bangers are male. The part they sit in is female. Some pieces have both. Our Universe Wet Ash Catcher has a 14 mm male joint and a 14 mm female joint.

The two sides must be the same size. If they aren’t, the piece won’t seal.

Which Milkyway pieces use which size

Our beaker and straight tube bongs have an 18 mm female joint. The exception is the Space Odyssey in 3D 11″ Beaker Bong with Collins Perc, which has no downstem and a 14 mm joint. That includes the Mini Apiary 11″ and the Roses X 18″, and straight tubes like the Signature X 18″ Straight Tube.

Our rigs, like the Hybrid Engine 9″, the Sidekick Inline 8.5″ and the Dragon Heart 7″, all use 14 mm.

The bong joint and the bowl can be different sizes

This trips people up. On bongs with a downstem, the downstem sits in the 18 mm main joint, and the bowl sits in the downstem. So the two sizes don’t have to match.

The Tiny Apiary Mini 8″ shows it. It has an 18 mm beaker joint, and it comes with a 14 mm Orbit bowl and a Universe 3.5″ downstem. Check the product page for both sizes before you add a bowl or stem.

Tiny Apiary Mini 8 inch beaker bong with a 14 mm Orbit bowl and Universe downstem

How to find your joint size

Start with the product page. We list the joint size in the specs. If you have no page to check, measure across the outside of a male joint with calipers or a ruler. Use the millimeter side.

What if the sizes don’t match?

An adapter can bridge two sizes. The downside is extra height and one more piece that can break. It’s easier to buy parts that match. If you want a set that fits from the start, the Combo Creator lets you build a bong with its stem, bowl and ash catcher together.

For help choosing, see our guides to ash catchers and downstems. Terms like borosilicate are in our glass glossary.

Joint size FAQ

Can I use a 14 mm bowl in an 18 mm bong? Often, yes. The bowl sits in the downstem, not in the bong’s joint. The Tiny Apiary ships that way. See the XL 2.5″ Bong Bowl, which fits any 14 mm female joint.

Do Milkyway rigs use 14 mm? The Hybrid Engine, Sidekick Inline and Dragon Heart 7″ are. Check the dab rig page for the one you want.